|
Paragon E-14A Xpress
The smallest size E-series, E-14 fires to 2000°F- ideal for enameling, ceramics, china painting, glass art and jewelry.
The Xpress-E-14A comes with the Sentry Xpress digital controller, which is mounted in the kiln base (instead of a side switch box) to save table space. The front control panel is tilted for easy operation.
Click here for info ion the Digital - Sentry Xpress 3 Key Controller Digital 
 |
Digital Controller fires in either Ramp-Hold or Cone-Fire. Control both heating and cooling with simple 3-key operation.
WATCH DIGITAL CONTROL DEMO
Ramp-Hold Demonstration |
The digital Sentry Xpress controller includes temperature hold, making this kiln suitable for silver clay. The 3-key digital controller is in the base. The front control panel is tilted for easy operation of the digital controller. Because this model no longer has the side-mounted switch box, it saves tabletop space.
The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Segment and 8-segment Ramp-Hold.
| Model |
E-14A |
| Max Temp F |
2000ºF |
| Chamber Width |
13" |
| Chamber Depth |
13.5" |
| Chamber Height |
8.75" |
| Cubic Feet |
0.88 cu ft |
| Phase |
1 |
| Voltage |
240 |
| Amperes |
14 |
| Watts |
1800 |
| Shipping Weight |
115 lbs |
|
Design programs with up to 8 segments (steps) in Ramp-Hold mode.
Fire to a single temperature at a single speed in the simplified Single Segment mode.
Ramp-Hold mode can store 4 programs.
Skip Segment feature in Ramp-Hold mode
Temperature hold
The Sentry Xpress can control both heating and cooling.
Program Review lets you check that the program you are about to fire is correct.
Temperature Display throughout firing and cooling in your choice of °F or °C
Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.
12 Month Warranty
LED Lights show whether you are in program, review, or firing mode.
|
The heating element, exposed in dropped, recessed insulating firebrick grooves, is easy to replace. It needs no element pins. Unlatch and open the door with one hand. No extra stand is needed; the built-in base stays cool during operation.
Options
| 1. BEAD DOOR: 2 1/2” x 6 1/2” bead door to your E-series is like buying two kilns instead of one. Not only can you fire enameling, glass, and ceramics, but with the bead door you can also anneal glass beads. Imagine the fun that this will add to your kiln. Comes complete with bead mandrel holder. |
 |
| 2. 2 x 2" WINDOW Watch the bright red kiln interior through the optional 2” x 2” high-temperature glass window. (Note: always wear firing safety glasses when viewing the kiln interior.) The glass window is guaranteed up to 1700°F. |
 |
|
